IMPLEMENTING CISCO ENTERPRISE NETWORK CORE TECHNOLOGIES (350-401 ENCOR) LATEST STUDY TORRENT & 350-401 VCE DUMPS & 350-401 PRACTICE CRAM

Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) latest study torrent & 350-401 vce dumps & 350-401 practice cram

Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) latest study torrent & 350-401 vce dumps & 350-401 practice cram

Blog Article

Tags: 350-401 Exam Introduction, 350-401 Actual Questions, Practice 350-401 Mock, New 350-401 Braindumps Pdf, 350-401 Complete Exam Dumps

BONUS!!! Download part of UpdateDumps 350-401 dumps for free: https://drive.google.com/open?id=1JwJEG338Ys9fApmoB2dXL1Hz0R6vUvTv

In the case of studying with outdated Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) practice questions, you will fail and lose your resources. UpdateDumps made an 350-401 Questions for the students so that they don't get confused to prepare for 350-401 Certification Exam successfully in a short time. UpdateDumps has designed the real 350-401 exam dumps after consulting many professionals and receiving positive feedback.

Cisco 350-401 (Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)) Exam is a certification exam offered by Cisco for IT professionals who want to validate their knowledge and skills in implementing Cisco Enterprise Network Core Technologies. 350-401 exam is part of the CCNP Enterprise certification and is designed to test the candidate's ability to implement and troubleshoot network infrastructure, including dual-stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. Passing 350-401 Exam is an essential step for IT professionals who want to advance their career in network engineering and administration.

>> 350-401 Exam Introduction <<

350-401 Actual Questions | Practice 350-401 Mock

Passing the Cisco 350-401 is the primary concern. To pass the hard 350-401 exam on the first try, you must invest more time, effort, and money. To pass the 350-401 Exam, you must have the right Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 350-401 Exam Dumps, which are quite hard to get online. Get it right away to begin preparing. UpdateDumps is a reputable platform that has been providing valid, real, updated, and error-free Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 350-401 Exam Questions.

What is 350-401 Exam

This Cisco Industrial Networking Specialist Certification exam evaluates a candidate's knowledge of the OSI layers of IP networks, as well as network devices like routers, switches, and cabling approaches; specific industrial devices, such as units, sensors, programmable logic controllers, and substation equipment; relevant industry standards and models such as the Purdue model, TIA, and environmental standards; and various important safety protocols. Scored in the same way as the Cisco CCENT/CCNA ICND1 100-105 exam, this certification is aimed at individuals who work in industrial environments.

Passed candidates should be willing to take on additional responsibilities, such as system administration. Cisco 350-401 Dumps is one of the most important exams for candidates who are interested in an entry-level position in the enterprise, thanks to its high salary potential. Professional experience is not required, however. 350-401 exam purpose: Candidates should plan to prepare for this exam by reviewing the “IP Telephony Fundamentals” section of the “Interconnecting Cisco Network Devices” book and by reviewing study guides and practice exams provided by the vendor of the test engine.

Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q327-Q332):

NEW QUESTION # 327
In which order of magnitude (time) is delay/latency measured when you use wide metrics in EIGRP?

  • A. nanoseconds
  • B. tens of microseconds
  • C. picoseconds
  • D. microseconds

Answer: C


NEW QUESTION # 328
Drag and Drop Question
Drag and drop the characteristics from the left onto the technology types on the right.

Answer:

Explanation:


NEW QUESTION # 329
Refer to the exhibit. CR2 and CR3 are configured with OSPF. Which configuration, when applied to CR1, allows CR1 to exchange OSPF information with CR2 and CR3 but not with other network devices or on new interfaces that are added to CR1?

  • A.
  • B.
  • C.
  • D.

Answer: A

Explanation:
By using the correct and exact network and subnet masks, CR1 will not turn on OSPF on new interfaces and it cannot exchange OSPF with other network devices by other interfaces than Gi0/0 & Gi0/1.
In this question we should understand that these commands make sure CR1 cannot form OSPF neighbor relationship with other routers directly (on a new interface). If it is connected through a switch then surely it can form OSPF neighbor relationship. For example if we add a new router to SW3 in the 10.165.231.0/24 subnet then surely it will create OSPF neighbor relationshipo with CR1.
Answer "router ospf 1
network 0.0.0.0 255.255.255.255 area 0
passive-interface GigabitEthernet0/2"
is not correct because if CR1 has a new interface then OSPF will also be turned on that interface.
Answer "interface Gi0/2
ip ospf 1 area 0
!
router ospf 1
passive-interface GigabitEthernet0/2"
is not correct as OSPF is not run on Gi0/1 and CR1 and CR3 cannot exchange OSPF information.


NEW QUESTION # 330
Which function does a fabric edge node perform in an SD-Access deployment?

  • A. Connects the SD-Access fabric to another fabric or external Layer 3 networks
  • B. Provides reachability border nodes in the fabric underlay
  • C. Encapsulates end-user data traffic into LISP.
  • D. Connects endpoints to the fabric and forwards their traffic

Answer: D

Explanation:
Explanation
There are five basic device roles in the fabric overlay:
+ Control plane node: This node contains the settings, protocols, and mapping tables to provide the endpoint-to-location (EID-to-RLOC) mapping system for the fabric overlay.
+ Fabric border node: This fabric device (for example, core layer device) connects external Layer
3 networks to the SDA fabric.
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.
+ Fabric WLAN controller (WLC): This fabric device connects APs and wireless endpoints to the SDA fabric.
+ Intermediate nodes: These are intermediate routers or extended switches that do not provide any sort of SD-Access fabric role other than underlay services.


NEW QUESTION # 331
An engineer must configure Interface and sensor monitoring on a router. The NMS server is located in a trusted zone with IP address 10.15.2.19. Communication between the router and the NMS server must be encrypted and password-protected using the most secure algorithms. Access must be allowed only for the NMS server and with the minimum permission levels needed. Which configuration must the engineer apply?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:
Option A is the correct configuration to apply interface and sensor monitoring on a router with the given requirements. This option uses SNMPv3, which is the most secure version of SNMP that supports encryption and authentication. The configuration steps are as follows12:
* Create an access list named nms that permits only the NMS server with IP address 10.15.2.19 to access the router: ip access-list standard nms and permit 10.15.2.19 0.0.0.0.
* Create a view named rw that includes all the SNMP objects: snmp-server view rw included.
* Create a group named nms that uses SNMPv3 with privacy (encryption) and authentication, and assigns the view rw and the access list nms to the group: snmp-server group nms v3 priv read rw access nms.
* Create a user named nms that belongs to the group nms and uses DES for authentication and AES for encryption, with the passwords despass and aespass respectively: snmp-server user nms nms v3 auth des despass priv aes 192 aespass.
Option B is incorrect because it does not use encryption for SNMP communication, which is required by the question. The noauth keyword in the snmp-server group command means that no authentication or encryption is used, which makes the SNMP packets vulnerable to eavesdropping and tampering1.
Option C is incorrect because it does not use the most secure algorithms for SNMP communication, which is required by the question. The md5 and des keywords in the snmp-server user command mean that MD5 and DES are used for authentication and encryption respectively, which are considered weak and outdated algorithms. AES and SHA are recommended instead1.
Option D is incorrect because it does not restrict the access to the NMS server only, which is required by the question. The snmp-server community command creates a community string that acts as a password for SNMP access, but it does not specify an access list to limit the source IP addresses that can use the community string. Therefore, any device that knows the community string can access the router via SNMP1. References: 1: Configuring SNMPv3, 2: SNMP Configuration Guide, Cisco IOS XE Gibraltar
16.12.x


NEW QUESTION # 332
......

350-401 Actual Questions: https://www.updatedumps.com/Cisco/350-401-updated-exam-dumps.html

BONUS!!! Download part of UpdateDumps 350-401 dumps for free: https://drive.google.com/open?id=1JwJEG338Ys9fApmoB2dXL1Hz0R6vUvTv

Report this page